Handlebar Vibration control! Easy on the hands! No screw-holes required!

!!!MANIC Salamander Super HEAVY bar-end weights

• Read the review in American Motorcyclist magazine.
• Dramatically cuts vibrations in the handgrips. How?
• For 7/8" or 1" outer diameter steel handlebars. Will it fit my bike?
• Solid Steel.
• 12.75 oz. (361 g) per side. So what?
• Full Black Chromate lacquered grade 12.9 hardware.
• Solid metal-on-metal mounting: firmly attaches inside the end of handlebar.
• Quick 5-minute installation with included tool.
• Read what our customers think!

Need even more weight?
Check out the new 16 oz. Dragonfly design for 7/8" bars.

Have Clamp-on Mirrors?
The new Clamp-on Mirror design for 7/8" bars allows you to attach mirrors.

Illustrated Instruction Manual
View the step-by-step, 8 page installation manual for the Bar-End Weights.

• Manual 198 KB pdf file

Available for 7/8" or 1" Steel handlebars in:

• 303 Stainless Steel. Bare metal look, and it never rusts, no matter how badly you spill. Same stuff the whole way through.
• Polished Chrome. Mirror finish, big "Bling" factor. The hardest finish to scratch.
• Gloss Black powdercoat.

Technical Details for determining compatibility and scale.

Are you trying to cure discomfort in your hands?

Try reading our article about hand numbness for information about factors involved including medical conditions and the setup of your bike, along with suggestions for some solutions.

Special warnings for bar-end weights:

This product is a resonant frequency reducer, not a vibration dampener. The physics of vibration reduction suggest that under extremely abnormal conditions of bar length, material, and vibration frequency, this product may not work as advertised. If you encounter such a situation, I would love to hear about it. Of course, if I can't help you make it work, you can send the product back for a full refund.

On most bikes this product has a negligible effect on steering, since steering inputs have a great deal lower frequency than engine-induced vibration.

HOWEVER! If your motorcycle tends to experience HEAD SHAKE, this product may make it BETTER, or WORSE. Always ride with great care after this product is installed, and carefully re-explore the handling behavior of your bike. If you detect any kind of shimmy or head-shake that was not there before, correct it before you wipe out! This product may yet be usable, if tire-choice, and the condition of the headset, shocks, and rear swingarm bearings are corrected. If you can't work it out, you can send this product back for a full refund.

Standard Weights for 7/8" OD handlebars Click for larger image. (Opens a new window.) 7/8" Polished Chrome $79.99/pair Click for larger image. (Opens a new window.) 7/8" Stainless Steel $69.99/pair Throttle Lock for 7/8" handlebars now available Click for larger image. (Opens a new window.) 7/8" Gloss Black Powdercoat $64.99/pair

Click for larger image. (Opens a new window.)

Gloss Black Powdercoat weight has the subtle class to make a 1979 KZ 400 look like $900 bucks!

Click for larger image. (Opens a new window.)

But, oh, the CHROME! The chrome weight makes it look like $909.98!

Frequently Asked Questions about bar-end weights.

Q. So why ever buy these, especially since there are pretty aluminum ones for cheaper?

Q. How do they stay in?

Q. Who would want these?

Q. What bikes will they fit?

Q. What about MY bike?

Q. Why not for aluminum handlebars?

Q. Do they work? Users speak out!

Q. How do they work?

Q. How do bar-end weights change the resonant frequency?

Q. Will all that weight on the bar ends slow down the responsiveness of my bike?

Q. Can't I just tough it out and save money?

Q. Why are my hands numb?

Special Applications

Kawasaki W650 notes (2.6 MB pdf file)

Weights for Kawasaki Concours